Splice Kit for 90mm Global Post

Yes, but only under strict engineering guidelines. While splice kits are heavily used for height extensions, they can be used for a post repair located in the lower part of the frame, provided all standard installation rules and bracing tolerances are met. It should never be used as a quick cosmetic patch; the structural integrity rules must always apply – Contact Global for further information.

No. Because splice kits must fit perfectly inside or over the unique structural bends of the steel post, they are brand-specific. Our kits are engineered exclusively to match our Global 90mm profile frames. They should never be forced onto alternative or mismatched racking profiles, as a loose fit will compromise the safety of the entire system.

You must install a minimum of 2 beam levels in that bay.

• At least 1 beam level must be installed below the splice.
• At least 1 beam level must be installed above the splice.

No. There is a strict limit of a maximum of 1 splice per individual upright post.